All prices include shipping to 48 state US and hardware.
Cost is $325 for the main bracket, you will also need a lower support for the sides.
You have your choice of lower supports:
1) My lower supports - priced at 75$ when purchased with the main bracket for a total of $400 for the entire fairing kit.
2) The bottom edge sits about 1.5" above the engine bar (if you have one) With a bolt through your engine bar, a spacer and washers you could support the lowers adequately.
As a plus I also have worked out a system that allow you to use a regular 7" LED streetglide headlight - about $80 instead of $300+ FXR 7" headlight.
The system will work with stock or higher handlebars. Drag bars will not work and VRSCF bikes will need to use a budman riser.
This system has been test fit on a 04 VRSCA and a 13 VRSCF. It uses the same basic system as my Road Glide mounts that fits all Vrods. And been installed on years from 02-14 and multiple models.
***this is a original 84 fxtr fairing
*****the yellow / white bike below are pictures showing what this will look like when completed (but not my pics).
Copyright © 2022 Vrodbagger - All Rights Reserved.